Shades without magnetic mounts
Step 1: Align the top of the magnets with the metal frame of the door and let it snap firmly.
Step 2: Align the bottom of the shade with the bottom of the frame and let the sides of the shade to snap firmly.
Shades with magnetic mounts
Step 1: Clean door surfaces around window and allow 5 minutes to dry.
Step 2: Locate magnet attaching points on shade, place shade in place. (Hint: you can open the window to check spacing to see if your shade is straightly aligned.)
Step 3: Mark location of magnet mounting points, peel off adhesive tape on magnet mounts and stick onto the marked position.
Step 4: Align the top of the magnets with the metal frame of the door and let it snap firmly.
Step 5: Align the bottom of the shade with the bottom of the frame and let the sides of the shade to snap firmly.
Please note:
If the shades are not fitting firmly on the rear end due to the magnets not holding it down, please try the following:
1: Switch the shades from the left to the right window (or vice versa).
2: Rotate the magnets toward the direction of the window frame for better magnetic contact.
3: Fold the shades in the opposite direction to straighten the shade (the shades may have been folded in transit).